English
                             
 
 
   
 
Product Information
Your Position Product
 
   
- Voltage detector IC  
- Reset IC  
 
- 1-Cell Li+ Battery Charger IC
- 2-Cell Lithium Battery Charger IC
- Multi-Cell Li+ Battery Charger IC
- LA Battery Charger IC
- LiFePO4 Battery Charger IC
- Solar Panel-Powered Charger IC
- NIMH Battery Charger IC
- Li+ Titanate Battery Charger IC
 
- WLED Driver
 
- DC-DC Converter
 
- N-channel MOSFET
- P-channel MOSFET
 
- Amplifiers
 
CN3795
4A, Multi-Chemistry Battery Charger With Photovoltaic Cell MPPT Function
Product Profile
 
General Description
The CN3795 is a PWM switch-mode multi-chemistry battery charger controller that can be powered by photovoltaic cell with maximum power point tracking function using few external components.
The CN3795 is specially designed for charging lithium ionLiFePO4 or Lithium Titanate batteries with constant current and constant voltage mode. In constant voltage mode, the regulation voltage is set by 2 external resistors. The constant charging current is programmable with a single current sense resistor.
Deeply discharged batteries are automatically trickle charged at 17.5% of the programmed constant charging current until the cell voltage exceeds 66.5% of constant voltage. The charge cycle is terminated once the charging current drops to 16% of full-scale current, and a new charge cycle automatically restarts if the charge current rises above 58.8% of full-scale charge current. CN3795 will automatically enter sleep mode when input voltage is lower than battery voltage.
Other features include under voltage lockout, battery over voltage protection, status indication, etc.
CN3795 is available in a space-saving 10-pin SSOP package.
 
 
Applications
Hand-held Equipment Portable Industrial and Medical Equipment
Battery-Backup Systems Standalone Chargers for Lithium ion,LiFePO4 or Lithium Titanate Batteries
Emergency Lamp and Camping Lamp    
 
Features
Photovoltaic Cell Maximum Power Point Tracking
Wide Input Voltage: 6.6V to 30V
Complete Charge Controller for Singleor Multi-cell Lithium ion, LiFePO4 or Lithium Titanate Batteries
Charge Current Up to 4A
High PWM Switching Frequency:310KHz
Can be used as Voltage Source when Battery is Absent
Charging Current is programmed with a current sense resistor
Automatic Conditioning of Deeply Discharged Batteries
Automatic Recharge
Charging Status Indication
Soft Start
Battery Overvoltage Protection
Operating Ambient Temperature 40≧ to 85≧
Available in 10-Pin SSOP Package
Pb-free, Rohs-Compliant, Halogen Free
 
Application document
Quick Start of CN3795 Demo Board
 
 
Copyright©2017-2018  Shanghai Consonance Electronics Incorporated. All rights reserved.